Archivio articoli

03.12.2009 15:04

Mossetti Eurosport 1/32

    Mossetti 1/32 Sports Chassis By Chris Frost The 1/32 Mossetti sports/GT chassis that a number of people are now using has a number of interesting features. These chassis come in both kit form and ready built from Canadian raceway owner and ISRA Delegate Ernie Mossetti. The...

—————

03.12.2009 15:01

How to set up your guide

 HOW TO SET UP YOUR GUIDE INTRODUCTION A slot car generally has 3 main points of contact with the track – the rear tyres, the front chassis "skids" and the guide/braids.  ( Grand Prix cars its the front wheels touching the ground rather than skids).  It is critical that the...

—————

03.12.2009 14:58

AXLE SPACING

   AXLE SPACING Axle spacers are an important requirement in car set up. It is important to set up the rear axle on your car properly so that you get optimum handling whilst complying with the BSCRA regulations. It is also important for the gears to mesh properly and spacers can help to...

—————

03.12.2009 10:42

Sezione Tecnica

 Nella pagina regolamenti ho inserito sulla destra la sezione'' tecnica''copiata dal sito dell'Associazione inglese ''BRITISH SLOT CAR RACING ASSOCIATION''che gentilmente mi ha autorizzato a farlo.Inoltre sul loro sito è stato inserito il link al nostro.Chi volesse contribuire a completare...

—————

03.12.2009 10:31

Design of Soldered Joints

 da    Design of Soldered Joints   Chassis need to be strong enough for the demands of normal racing - and that includes accidents.  (Even if your driving is perfect, other drivers can cause accidents!)    Chassis will bend or break if you hit them hard...

—————

03.12.2009 10:26

Soldering

 da  SOLDERING Is soldering something that other people do but you can't? Most slot cars are built using solder joints, whether it is simply soldering in oilites or full chassis construction. I would say that soldering is an essential skill for any slot racer – there is nothing worse...

—————

03.12.2009 09:47

Modelli

 da   Eurosport 1/24 This class allows a free choice of motor and chassis, and is the fastest class of BSCRA racing.  Below is the Horky chassis used by Vladimir Horky to win the 2008 1/24 Nationals.   Copyright ©   2009 British Slot Car Racing Association ...

—————

03.12.2009 09:23

Introduzione

da     SLOT CAR CHASSIS Why are the cars built like that? Some slot cars look complicated, others look simple.  Why are they like that and what are the important features? A simple 2 piece JK 1/32 Production Chassis ...

—————

28.04.2009 09:58

Classifica ES24 e nuove foto

 Pubblicata la classifica ES24 della gara di SLOT UP e nuove foto

—————

23.04.2009 15:43

foto Campionato It. ES24 e 1/24 Prod.

 Pubblicata nella gallery foto dell'ultima gara di Campionato italiano organizzata da SLOT Up

—————